The grout is intended for jointing wall and floor tiles, particularly on surfaces with high chemical and mechanic resistance requirements.
Sets and hardens without contracting. After hardening, it is frost-, water- and chemical-proof. It is characterized by very high resistance to abrasion.
- High durability
- Very good resistance to abrasion
Amount per unit
Unit per pallet
The mortar can be stored for up to 12 months from production date in sealed packaging and at temperatures, ranging from +5°C to +25°C. The storage area shall be kept out of the reach of children, protected against direct sunlight and located far from heat sources and naked flames. It can be transported by any means of transport, at a temperature not lower than +5°. It is not subject to ADR provisions.
|Resistance to bending||≥30MPa|
|Time of reaching technological durability||after c.a. 24h|
|Time of reaching full mechanic durability||after c.a. 3 days|
|Time of reaching full chemical resistance||after 7 days|
|Chemical resistance||35% sulfuric acid, 20% sodium hydroxide, 3% hydrochloric acid, 10% citric acid, 5% lactic acid|
|Resistance to temperatures||from –40oC to +110oC|
|Shelf life||Up to 60 minutes|
|Mixing proportions||component A:B as per weight proportion 89:11|
|Joint width||up to 10mm|