Clipboard
Clipboard (0)
Product index

DAMP-PROOFING INJECTION LIQUID 900
Solution for performing injections in humid walls, also intended for impregnation.

 
Downloads:
Technical data sheet Technical_data_sheet_DAMP-PROOFING_INJECTION_LIQUID_900_DC0042124.PDF
129.63 kB
Sicherheitsdatenblatt (SDB) Sicherheitsdatenblatt__SDB__DAMP-PROOFING_INJECTION_LIQUID_900_DC0057214.PDF
215.32 kB
IM0010765_md.jpg btn_search

Płyn 900 is a specialist solution intended for executing horizontal diaphragm protecting structures against capillary action; intended for both the gravitational and pressure method.

!Innen/Aussen!!Nicht bei einer Temperatur unter 5°C oder über  25°C anwenden!!12 Monate lagerfähig!!Achtung! Hände und Augen schützen!
  • Waterproof
  • Freezeproof
  • Hydrophobizes and narrows down the capillaries
  • Good penetration of humid walls
  • For gravitational and pressure methods

Amount per unit

5 ltr./Kanister

Unit per pallet

120 Stk./Pal.

Storage

The mortar can be stored for up to 12 months from production date in sealed packaging and at temperatures, ranging from +5°C to +25°C. The storage area shall be kept out of the reach of children, protected against direct sunlight and located far from heat sources and naked flames. It can be transported by any means of transport, at a temperature not lower than +5°. It is not subject to ADR provisions.

Abmessung размер

Not applicable.

ColourColorless after drying
pHc.a. 12
Densityc.a. 1.10 g/cm3
Water mixing ratio1:1 to 1:5, depending on the absorbency
ConsumptionWith impregnation performed in one layer from c.a. 0.05 to 0.25l per 1 m2
ConsumptionWith injections, liquid consumption depends on the cross section of the wall. With porous materials, consumption can be even 30% higher; with non-absorbent materials, consumption can be c.a. 20% lower. For a 25 cm thick wall, it is c.a. 0.2l per 50 cm, c.a. 0.35l per 100cm, and c.a. 0.7l per 1 borehole.