The adhesive is intended for applying wall and floor ceramic tiles (gres, terracotta, clinker, ceramics, mosaic tiles), natural stone tiles, as well as plastic tiles both on rigid and demanding (deforming) groundworks, or ill-gripping groundworks, both indoors and outdoors
Indoor and outdoor use
Does not discolor natural stone.
It is also suitable for sticking panels imitating façade boards, clinker bricks and other such elements. for all wall surfaces. Thanks to its use, we reduce the risk of salt efflorescence on these surfaces.
- Ready to use.
- High grip
- For OSBs and chipboards
- For a system with an elevation board (imitation of wood)
Quantity per unit
Unit per pallet
The mortar can be stored for up to 12 months from production date in sealed packaging and at temperatures, ranging from +5°C to +25°C. The storage area shall be kept out of the reach of children, protected against direct sunlight and located far from heat sources and naked flames. It can be transported by any means of transport, at a temperature not lower than +5°. It is not subject to ADR provisions.
|Classification as per EN 12004+A1||D2E|
|Tile application time after the application of adhesive on the groundwork||up to 30 minutes|
|Correction time||up to 20 minutes|
|Possibility of standing on the laid floor||after 2 days at the earliest; when applying tiles on tiles, or chipboards or OSBs, this time can extend, depending on the layer thickness|
|Possibility of pointing||after 2 days at the earliest; when applying tiles on tiles, or chipboards or OSBs, this time can extend, depending on the layer thickness|
|Maximum grout layer||up to 5 mm|
|Avg.coverage per 1m2||about 3 kg|