Adhesive based on cement and special silicas for laying wall and floor tiles, inside and outside buildings, including pools and balconies.
Professional adhesive intended for applying gres tiles, also the large-format ones, as well as other types of ceramic, terracotta, clinker, wall and floor tiles, both on rigid and deforming groundworks, indoors and, in the case of using frost-proof tiles, also outdoors.
Meant for tiling difficult surfaces: on balconies and terraces, in places of high level of moisture (bathroom, kitchens, laundry rooms), on jointless cement and anhydrite floors, also with underfloor heating systems.
Fine grain <0,3mm and special polymers with nanonoparticles causing increased tiling comfort in comparison to traditional products. Adding water is possible based on contractor`s preferences and the application location (floor or wall).
- C2TE class
- from 2mm to 15mm
Amount per unit
Unit per pallet
Up to 15 months from the date of manufacture while storing in dry places and in undamaged factory.
EN 12004:2007 + A1:2012
|Classification as per EN 12004+A1||C2TE|
|Shelf life after mixing with water||c.a. 3 hours (at +20°C)|
|c.a. 20 minutes (at +20°C)|
|Possibility of standing on the laid floor||after c.a. 24h|
|Possibility of pointing||after 48 hours|
|Water mixing ratio||approx. 8 liters of water per 25 kg of mortar|
|Layer thickness||from 2 to 15 mm|
|Avg.coverage per 1m2||c.a. 1.3 kg/m2 per 1mm of layer thickness|
|Reaction to fire||A1/A1fl|
|Joint strength expressed as: initial adhesion||≥ 1,0 N/mm²|
|≥ 1,0 N/mm²|
|Adhesion after frosting/defrosting cycle||≥ 1,0 N/mm²|
|Release / content of hazardous substances||* NPD|