Adhesive based on cement and special silicas for laying wall and floor tiles, inside and outside buildings, including pools and balconies.
Professional adhesive intended for applying all types of tiles and stone panels made of marble, granite, travertine, sandstone, basalt, slate, andesite, and other, and for applying tiles: ceramic, terracotta, clinker, gres, including the large-format ones.
Meant for tiling difficult surfaces: on balconies and terraces, in places of high level of moisture (bathroom, kitchens, laundry rooms), on jointless cement and anhydrite floors, also with underfloor heating systems.
Fine grain <0,3mm and special polymers with nanonoparticles causing increased tiling comfort in comparison to traditional products. Adding water is possible based on contractor`s preferences and the application location (floor or wall).
- C2TE class
Amount per unit
Unit per pallet
Up to 15 months from the date of manufacture while storing in dry places and in undamaged factory.
EN 12004:2007 + A1:2012
|Classification as per EN 12004+A1||C2TE|
|Shelf life after mixing with water||c.a. 3 hours (at +20°C)|
|c.a. 20 minutes (at +20°C)|
|Open time||c.a. 20 minutes (at +20°C)|
|The possibility of trading on finished lining||after c.a. 24h|
|Possibility of pointing||from 24 to 48 hours|
|Layer thickness||from 2 to 15 mm|
|Avg.coverage per 1m2||c.a. 1.3 kg/m2 per 1mm of layer thickness|
|Water mixing ratio||approx. 8 liters of water per 25 kg of mortar|
|Reaction to fire||A1/A1fl|
|Joint strength expressed as: initial adhesion||≥ 1,0 N/mm²|
|≥ 1,0 N/mm²|
|Adhesion after frosting/defrosting cycle||≥ 1,0 N/mm²|
|Discharge of dangerous substances||* NPD|